The full write-up on this experience by Jim Bergmann👇
The vacuum rig setup can be found here👇
Join Jim Bergmann, TruTech Tools, NAVAC, AccuTools and myself as we attempt a deep vacuum/evacuation in record time on a 2500 ton YK centrifugal chiller. This was attempted with a 12 CFM pump, a single 3 foot hose, and no oil changes. The results were profound to say the least. Not just in the results, but what we learned along the way.
Please consider subscribing and hitting the “bell” icon for a heads up when new content drops!
My personal HVAC troubleshooting bag load out https://www.kit.co/akhvac
My personal HVAC PPE/safety/comfort gear
My personal HVAC Vaccum kit in a bucket setup https://www.kit.co/akhvac
My personal HVAC Recovery kit in a bucket https://www.kit.co/akhvac
My pocket HVAC EDC (everyday carry) https://www.kit.co/akhvac
My HVAC Bearing, Hub and Pulley Removal bag https://www.kit.co/akhvac
My recommended HVAC books for technicians https://www.kit.co/akhvac
How I track my YouTube analytics and optimize my channel!!
CONTACT ME DIRECT—– firstname.lastname@example.org
FOLLOW ME ON SOCIAL MEDIA
HVAC Vehicle Layouts Facebook group: https://www.facebook.com/groups/141116779808715
DISCLAIMER: This video and description contains affiliate
links, which means that if you click on one of the product
links, I’ll receive a small commission. This helps support
the channel and allows us to continue to make videos like
this. Thank you for the support!